| SB-CR-095 | Bowden controls replacement | 27/01/2022 | | | |
| SB-CR-091 | Replacement of the lower engine hinge (without holes) | 09/11/2021 | | | |
| SB-CR-090 | Backrest wall reinforcement | 04/10/2021 | 2 | 03/12/2021 | |
| SB-CR-089 | Installation of the ballast weight | 01/10/2021 | | | |
| SB-CR-088 | Optional installation of Woodcomp Klassic 170/3/R propeller | 02/09/2021 | | | |
| SB-CR-084 | Issue of the PS-28 Cruiser Maintenance Manual, Revision 24 | 08/12/2020 | | | |
| SB-CR-087 | Substitution of Trail Tech light | 08/04/2021 | 2 | 15/12/2021 | |
| SB-CR-086 | Substitution of Kuntzleman light | 08/04/2021 | 1 | 11/06/2021 | |
| SB-CR-085 | Sup18_PS-POH-P10010xx for PiperSport | 23/03/2021 | | | |
| SB-CR-085 | Sup18_SC-POH-xxSCxxx for SportCruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup18_PS-POH-1-1-14 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup18_PS-POH-1-1-13 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup18_PS-POH-1-1-12 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup18_PS-POH-1-1-11 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup09_PS-POH-P10010xx for PiperSport | 23/03/2021 | | | |
| SB-CR-085 | Sup09_SC-POH-xxSCxxx for SportCruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup09_PS-POH-1-1-14 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup09_PS-POH-1-1-13 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup09_PS-POH-1-1-12 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Sup09_PS-POH-1-1-11 for PS-28 Cruiser | 23/03/2021 | | | |
| SB-CR-085 | Installation of the Passive Chemical CO Detector | 23/03/2021 | | | |
| SB-CR-081 | Rudder stops replacement | 22/02/2021 | | | |
| SB-CR-033 | Change from Cylinder Head Temperature to Coolant Temperature measurement method for aircraft equipped with Rotax 912 ULS and 912 S2 series engine with a new cylinder head design. POH revised pages for SkyView:PS-POH-1-1-13_R1 POH revised pages for EMS-D120:PS-POH-1-1-11_R3 | 18/03/2016 | 1 | 28/01/2021 | |
| SB-CR-083 | Visual inspection of engine mount | 05/11/2020 | 1 | 08/12/2020 | |
| SB-CR-082 | Replacement of canopy glass | 05/11/2020 | | | |
| SB-CR-042 | Landing Light Replacement (original TrailTech 4213-SX for TrailTech D112-SX) | 14/05/2018 | 3 | 16/09/2020 | |
| SB-SC-013 | Dynon EFIS-D100 / EMS-D120 firmware uprade, setting and locking | 09/02/2012 | 4 | 12/05/2020 | |
| SB-CR-016 | Inspection of the nose landing gear leg and its replacement, if required | 09/10/2013 | 6 | 31/08/2015 | |
| SB-CR-017 | Replacement of rivets for bolts in the area of the main landing gear attachment | 05/03/2014 | | | |
| SB-CR-018 | Optional installation of enhanced heating system and blowers for defogging of the windscreen shield | 21/01/2014 | | | |
| SB-CR-021 | Replacement of the nose landing gear leg | 10/07/2014 | | | |
| SB-CR-024 | Periodic inspection of the float buoyancy of ROTAX engine type 912 and 914 (Series) | 16/10/2014 | 2 | 08/04/2015 | |
| SB-CR-026 | Exchange of floats on ROTAX Engine Type 912 Series | 08/04/2015 | | | |
| SB-CR-031 | Inspection/replacement of the Semperit FUB 386 fuel hoses | 10/08/2015 | | | |
| SB-CR-032 | Reinforcement of the nose wheel leg attachment to the firewall | 23/10/2015 | | | |
| SB-CR-036 | Inspection of Rivet Holes on the Firewall | 29/08/2017 | 1 | 08/11/2017 | |
| SB-CR-041 | Replacement of the original AVE-WPSTR/G-64T / AVE-WPSTR/G-65T Position/Strobe LED lights by the AVE-WPSTR/G-64T Mod (3) type | 12/09/2018 | | | |
| SB-CR-044 | Inspection and / or replacement of the valve push-rod-assy. for ROTAX® Engine Type 912 S2 and 912 ULS2 | 30/11/2017 | | | |
| SB-CR-046 | Inspection and/or replacement of oil filter of ROTAX Engine Type 912 S2 / 912 ULS2 | 28/02/2018 | | | |
| SB-CR-049 | Replacement of the landing light circuit breaker MS3320 | 09/04/2018 | | | |
| SB-CR-050 | Installation of dual thermostat Hektik F1107 into the airplane engine cooling system | 23/03/2018 | | | |
| SB-CR-065 | Installation of improved canopy guidance during closing. | 07/12/2018 | | | |
| SB-CR-067 | Installation of new engine cowlings, SE0556N (upper) and modified lower SE0562N cowling for efficient cooling at high temperature conditions | 05/12/2019 | | | |
| SB-CR-071 | Inspection and eventual adjustment of sufficient distance between exhaust and cooling tubes (Aircraft operating under EASA rules only) | 19/08/ 2019 | | | |
| SB-CR-073 | Inspection and lubrication of Gerdes or ACS ignition switches and installation of a diode across the starter solenoid coil, if the diode is missing. | 29/06/2020 | | | |
| SB-CR-075 | Inspection and eventual replacement of carburettor circlip for Rotax engine type 912 (Series) | 30/10/2019 | | | |
| SB-CR-077 | Replacement of the original SG0030L/P main landing gear legs by the reinforced SG0160L/P variant. | 19/09/2019 | | | |
| SB-CR-079 | Installation of new cooling exhaust in the engine lower cowling | 09/12/2019 | | | |
| SB-PS-023 | Issue of the POH PS-POH-1-1-11, PS-POH1-1-12 Revision 2 | 10/07/2014 | | | |
| SB-SC-012 | Issue of the PS-28 Cruiser/SportCruiser Maintenance Manual, Revision 5 CR-MM-1-0-00-R5 | 30/11/2011 | 5 | 01/06/2015 | |
| SB-SC-013 | Dynon EFIS D100 / EMS D120 settings and lockings | 09/02/2012 | 3 | 12/06/2012 | |
| SB-SC-019 | Optional installation of Sensenich 3B0R5R68C propeller | 11/02/2014 | | | |
| SB-SC-020 | Optional installation of Sensenich 3B0R5R68C propeller with After-muffler | 11/02/2014 | | | |
| SB-SC-022 | Installation of Garmin GNC 255A NAV/COM and 12 V socket, replacement of switches and cabin lighting | 01/04/2014 | | | |
English
