| SB-CR-095 |
Bowden controls replacement |
27/01/2022 |
|
|
|
| SB-CR-091 |
Replacement of the lower engine hinge (without holes) |
09/11/2021 |
|
|
|
| SB-CR-090 |
Backrest wall reinforcement |
04/10/2021 |
2 |
03/12/2021 |
|
| SB-CR-089 |
Installation of the ballast weight |
01/10/2021 |
|
|
|
| SB-CR-088 |
Optional installation of Woodcomp Klassic 170/3/R propeller |
02/09/2021 |
|
|
|
| SB-CR-084 |
Issue of the PS-28 Cruiser Maintenance Manual, Revision 24 |
08/12/2020 |
|
|
|
| SB-CR-087 |
Substitution of Trail Tech light |
08/04/2021 |
2 |
15/12/2021 |
|
| SB-CR-086 |
Substitution of Kuntzleman light |
08/04/2021 |
1 |
11/06/2021 |
|
| SB-CR-085 |
Sup18_PS-POH-P10010xx for PiperSport |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup18_SC-POH-xxSCxxx for SportCruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup18_PS-POH-1-1-14 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup18_PS-POH-1-1-13 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup18_PS-POH-1-1-12 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup18_PS-POH-1-1-11 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup09_PS-POH-P10010xx for PiperSport |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup09_SC-POH-xxSCxxx for SportCruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup09_PS-POH-1-1-14 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup09_PS-POH-1-1-13 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup09_PS-POH-1-1-12 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Sup09_PS-POH-1-1-11 for PS-28 Cruiser |
23/03/2021 |
|
|
|
| SB-CR-085 |
Installation of the Passive Chemical CO Detector |
23/03/2021 |
|
|
|
| SB-CR-081 |
Rudder stops replacement |
22/02/2021 |
|
|
|
| SB-CR-033 |
Change from Cylinder Head Temperature to Coolant Temperature measurement method for aircraft equipped with Rotax 912 ULS and 912 S2 series engine with a new cylinder head design. POH revised pages for SkyView:PS-POH-1-1-13_R1 POH revised pages for EMS-D120:PS-POH-1-1-11_R3 |
18/03/2016 |
1 |
28/01/2021 |
|
| SB-CR-083 |
Visual inspection of engine mount |
05/11/2020 |
1 |
08/12/2020 |
|
| SB-CR-082 |
Replacement of canopy glass |
05/11/2020 |
|
|
|
| SB-CR-042 |
Landing Light Replacement (original TrailTech 4213-SX for TrailTech D112-SX) |
14/05/2018 |
3 |
16/09/2020 |
|
| SB-SC-013 |
Dynon EFIS-D100 / EMS-D120 firmware uprade, setting and locking |
09/02/2012 |
4 |
12/05/2020 |
|
| SB-CR-016 |
Inspection of the nose landing gear leg and its replacement, if required |
09/10/2013 |
6 |
31/08/2015 |
|
| SB-CR-017 |
Replacement of rivets for bolts in the area of the main landing gear attachment |
05/03/2014 |
|
|
|
| SB-CR-018 |
Optional installation of enhanced heating system and blowers for defogging of the windscreen shield |
21/01/2014 |
|
|
|
| SB-CR-021 |
Replacement of the nose landing gear leg |
10/07/2014 |
|
|
|
| SB-CR-024 |
Periodic inspection of the float buoyancy of ROTAX engine type 912 and 914 (Series) |
16/10/2014 |
2 |
08/04/2015 |
|
| SB-CR-026 |
Exchange of floats on ROTAX Engine Type 912 Series |
08/04/2015 |
|
|
|
| SB-CR-031 |
Inspection/replacement of the Semperit FUB 386 fuel hoses |
10/08/2015 |
|
|
|
| SB-CR-032 |
Reinforcement of the nose wheel leg attachment to the firewall |
23/10/2015 |
|
|
|
| SB-CR-036 |
Inspection of Rivet Holes on the Firewall |
29/08/2017 |
1 |
08/11/2017 |
|
| SB-CR-041 |
Replacement of the original AVE-WPSTR/G-64T / AVE-WPSTR/G-65T Position/Strobe LED lights by the AVE-WPSTR/G-64T Mod (3) type |
12/09/2018 |
|
|
|
| SB-CR-044 |
Inspection and / or replacement of the valve push-rod-assy. for ROTAX® Engine Type 912 S2 and 912 ULS2 |
30/11/2017 |
|
|
|
| SB-CR-046 |
Inspection and/or replacement of oil filter of ROTAX Engine Type 912 S2 / 912 ULS2 |
28/02/2018 |
|
|
|
| SB-CR-049 |
Replacement of the landing light circuit breaker MS3320 |
09/04/2018 |
|
|
|
| SB-CR-050 |
Installation of dual thermostat Hektik F1107 into the airplane engine cooling system |
23/03/2018 |
|
|
|
| SB-CR-065 |
Installation of improved canopy guidance during closing. |
07/12/2018 |
|
|
|
| SB-CR-067 |
Installation of new engine cowlings, SE0556N (upper) and modified lower SE0562N cowling for efficient cooling at high temperature conditions |
05/12/2019 |
|
|
|
| SB-CR-071 |
Inspection and eventual adjustment of sufficient distance between exhaust and cooling tubes (Aircraft operating under EASA rules only) |
19/08/ 2019 |
|
|
|
| SB-CR-073 |
Inspection and lubrication of Gerdes or ACS ignition switches and installation of a diode across the starter solenoid coil, if the diode is missing. |
29/06/2020 |
|
|
|
| SB-CR-075 |
Inspection and eventual replacement of carburettor circlip for Rotax engine type 912 (Series) |
30/10/2019 |
|
|
|
| SB-CR-077 |
Replacement of the original SG0030L/P main landing gear legs by the reinforced SG0160L/P variant. |
19/09/2019 |
|
|
|
| SB-CR-079 |
Installation of new cooling exhaust in the engine lower cowling |
09/12/2019 |
|
|
|
| SB-PS-023 |
Issue of the POH PS-POH-1-1-11, PS-POH1-1-12 Revision 2 |
10/07/2014 |
|
|
|
| SB-SC-012 |
Issue of the PS-28 Cruiser/SportCruiser Maintenance Manual, Revision 5 CR-MM-1-0-00-R5 |
30/11/2011 |
5 |
01/06/2015 |
|
| SB-SC-013 |
Dynon EFIS D100 / EMS D120 settings and lockings |
09/02/2012 |
3 |
12/06/2012 |
|
| SB-SC-019 |
Optional installation of Sensenich 3B0R5R68C propeller |
11/02/2014 |
|
|
|
| SB-SC-020 |
Optional installation of Sensenich 3B0R5R68C propeller with After-muffler |
11/02/2014 |
|
|
|
| SB-SC-022 |
Installation of Garmin GNC 255A NAV/COM and 12 V socket, replacement of switches and cabin lighting |
01/04/2014 |
|
|
|